polymers

HIGH DENSITY POLYETHELENE G-LEX TYPICAL PROPERTIES

 

Grade MFI
(gm/10 min.)
(2.16 kg.)
at 190oC
Density
(grn/cml)
Mol. Wt.
Distribution
Application
 

INJECTION MOULDING

158A 180 18 0.958 Narrow Houseware-buckets, tubes etc.
165A 130 13 0.965 Narrow Houseware-pails, toys, sundry goods, tote boxes, large frozen food containers
168A 055 5.5 0.968 Narrow Industrial containers, bottles, crates, vegetable crates.
I 68u 055 5.5 0.968 Narrow Outdoor application such as containers, shipping crates, luggage etc.
 

BLOW MOULDING

B 59A 003 0.35 0.959 Wide Small containers such as Detergent bottles, cosmetic bottles
B 63A 003 0.3 0.965 Medium Medium sized containers for Kerosene
B 55HM 0003
(HMHDPE)
0.03 0.955 Wide Large containers for storage & transport of chemicals, non edible oil, etc., barrels, drums.
 

RAFFIA

W 54A O11 1.1 0.954 Narrow Stretched tape for waven bags and fabrics, jumbo bags, tarpaulins, etc.
 

MONOFILAMENT

M 54A 001 0.8 0.954 Narrow Rope, nets, general purpose monotilament
 

PIPE

P 54A 001 0.11 0.954 very wide Small/medium pipes for water supply system
P 61 A 0004 0.04 0.961 Very wide Large pipes for civil, sewage application
 

FILM

F 56HM 0004 0.04 0.956 Very wide Merchant bags, carry bags, fi,ozen food bags, liners, tissue-like film
F 5OHM 0003 0.03 0.950 Very wide Ultra thin films, wraps, heavy duty bags

 

HIGH DENSITY POLYETHELENE G-LENE TYPICAL PROPERTIES

 

Grade MFI
(gm/lo min.)
(2.16 kg.)
at 190'C
Density
(gm/cml)
Mol.Wt.
Distribution
Application

 

INJECTION MOULDING
150A 180 18 0.950 Narrow Thermoware, toys, housewares buckets, tubs.
150A 145 14.5 0.950 Narrow Houseware, basins, pails, etc.
160A 050 5.0 0.960 Narrow Crates, tote boxes, moulded luggage
 

BLOW MOULDING

B 55A 004 0.4 0.955 Narrow General purpose bottles and containers
 

RAFFIA

W 49A 007 0.7 0.949 Narrow Woven bags and fabric
 

MONOFILAMENT

M 45A 004 0.4 0.945 Medium General purpose monofilament
 

PIPE

P 36A 002 0.28 0.936 Wide Gas pipe
 

FILM

F 56A 003 0.3 0.956 Wide co-extrusion film
F 45A 003 0.3 0.945 Wide Linear co-extrusion film

 

LINEAR LOW DENSITY POLYETHYLENE G-LENE TYPICAL PROPERTIES

 

Grade MFI
(gm/10 min.)
(2.16 kg.)
at 190 oC
Density
(gm/cm2)
Mol. Wt.
Distribution
Application
 

FILM

F 22S 014 1.4 0.922 Narrow General purpose film, Mulch film blended with LDPE
F 22A 014 1.4 0.922 Narrow Laminating film
F 19A 007 0.75 0.919 Narrow Milk pouches, liquid packaging, detergents and carry bags, heavy duty film
F 19A 007 0.75 0.919 Narrow Laminating film, cling film
F 35A 018 1.85 0.935 Narrow Overwrap film, extruded netting
 

ROTOMOULDING

R 35A 042 4.2 0.935 Narrow Water storage tanks, pallets, chemical tanks
R 35U 042 4.2 0.935 Narrow Outdoor storage containers, toys
R 39U 029 2.9 0.939 Narrow Large tote bins, agricultural  & industrial uses
 

INJECTION MOULDING

I 24A 530 53 0.924 Narrow Caps and closures, flowers, shopping baskets
 

PIPE AND CONDUITS

P 19A 007 0.75 0.919 Medium Drip irrigation pipes & conduits

 

 

L.D.P.E. RESIN FOR FILM EXTRUSION (OTHENE OBFK-0114 NATURAL)

 

Property
Specimen Testing Methode Unit Value
Basic Compound Properties 1.90mm compression moulded sample
Density ASIM D-1505 at 23 oC g/ml 0.918 av
Melt Index ASTM D-1238 at 100 oC g/l 0 min 2.0 av.
Extrudability Minimum recommended gauge micron 18.7
Stock (compound) deg. centingrade 165
temperature recommended
Mechanical Properties 37.5 micron tubular tilm
Tensile Strength ASTM D-882
Machine Direction kgs/sq.cm 140
Transverse Direction kgs/sq.cm 126
Ultimate Elongation ASTM D-882
Machine Direction Percent 300av
Transverse Direction Percent 500av
Optical Properties 37.5 micron tubular film
Haze ASTM D- 1 003 Percent 12
Glass ASTM D-523 100
Miscellaneous Properties
Co-efficient of Friction (measured 24 hours after extrusion) 0.3 max
 

L.D.P.E. RESIN FOR INJECTION MOULDING (OTHENE OBMW-00OB1

 

Property Specimen Testing Method Unit Value
Basic Compound Properties 1-90 mm compression moulded sample
Densitv D-1505 at 23 oC g/ml 0.918 av
Melt Index D-1238 at 100 oC g/10 min. 23
Mechanical Properties 1.90 mm compressionmoulded sample
Tensile Strength D 638 kg/cm2 112
Ultimate Elongation D-638 % 200
Moulding Properties Injection Moulded sample
Minimum Gross Temp. oC 204
Minimum Pressure kg/cm2 246
Tli the mould at 232 oC
Mould Shrinkage
Pellet Size
%
mm
1 to 3
3.18nomirial

 

L.D.P.E. OBFA-0790 NATURAL-7 (MILK POUCH GRADE)

 

Properties Test Methode Typical Value
Density ASTM D-1505 0.920 g/ml.
Melt Index ASTM D-1238 0.030 g/10 min.
Tensile Strength ASTM D-638
Machine Direction 175 kg/cm2
Transverse Direction 125 kg/cm2
Elongation ASTM D-638
Machine Direction 280%
Transverse Direction 590%
DART Strength (37-5 mic. film-F50) ASTM D- 1709 80 gms
Gloss ASTM D-1003 45
Haze ASTM D-528 20
Stress Crack Resistance (F50) ASTM D-1693 20 Hrs
Co-efficient of Friction ASTM D-2103 0.16
Treatability Good
Sealability Excellent

Our Products 


   

Home | Profile | Prices | Products | Clients | Transport | Associates | Contact | Enquiry | Tips


Venus Petrochemicals (Bombay) Pvt. Ltd.
27, 1st flr. Minerva Compd., Sewree Bunder Rd., Sewree (East), Mumbai-400 015. , India.

Tel: + 91 - 22 - 5046 3100 / 2416 3182, Fax: + 91 - 22 - 2416 3193 / 5046 3162
Email : info@venuspetrochem.com

Website managed by www.web-mantra.com